In this article we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and tricks that you can use.
For those who have a dog that likes to bark, and especially if your dog loves to play in the garden and other regions of the home, you will need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup that will look a little scary at first, but it’s really very straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape out of the cardboard, so you will have to cut around the edge of the mask so that you get something which resembles a cone. The main thing here is to be realistic with what kind of paper plate that you’re using.
Then you will have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can make certain that nothing will leak once you put the mask on. Be sure that the edges are cut so that the edges aren’t sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint needs to be slightly thicker https://schpl-schibsted-pl-frontend-qa.seals.schibsted.pl/?p=20417 than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t worry too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everyone! It’s also a good idea to wash away any excess paint after you are done, so that you don’t end up with smudges or smears on your dog.
Then it’s time to glue the mask on your dog’s head. First you need to be certain that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you may start to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and fold it over. Make sure that it’s quite strong and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you have the mask snugged firmly onto the face of your dog. Do not make the folds too big or else it could look messy. Once you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask onto the dog. Make certain the ears are level and be certain it’s not too short or long as this will cause some issues with the mask slipping off the dog’s face.
If you are using a dog mask as your pet security, you will need to do some sanding to make sure that it is secure on your dog. You can do it by sanding off any excess paper which might have been eliminated from your mask.
